Sensaphone IMS4000
Home About Us Computer Systems Complete POS System POS Monitors All-In-One Terminals Contact
Sensaphone 1100 Sensaphone 2000 Sensaphone Express Sensaphone Skymetry IMS-4000 SCADA 3000

Sensaphone 4000 / IMS-4000 Monitoring System for Multiple Data Center Facility Locations

Whether you have a small room or a large data center, Sensaphone IMS-4000 System provides complete monitoring for your facility, and is capable of monitoring multiple locations within a facility, county or country. It is designed to monitor your entire infrastructure, which includes the environment, physical security, and network operation.

IMS4000 system is a standalone infrastructure monitoring system with an integrated voice and modem, an internal UPS, flash-disk storage, and a web server, all in a simple-to-install 1U rack mountable package. From the wide array of its plug-and-play monitoring devices to its sophisticated software, the Sensaphone 4000 is a complete, flexible, and integrated system.

Sensaphone Models
Model 400
Model 800
Model 1400
Model 1800
Model WEB600
Model SAT4D
Model 2800
Station Sitter
Sensaphone 2000
Sensaphone Express II
SCADA 3000
Privacy/Return Policy
Resellers Sign-up
DemoSensaphone recorded voice demo
Monitor critical environmental conditions such as Temperature, Humidity, Smoke, Sound Level, Motion, Water, Intrusion, and Power Outages with the IMS-4000 Host and Node. Each Host and Node unit supports up to eight Environmental Sensors. When a sensor exceeds the threshold you configure, high temperature for example, you are notified by the IMS4000 about the condition. Lights on the face of the IMS Host instantly reveal any outstanding problems. With sound level monitoring you can be notified if an audible alarm goes off, and you can remotely listen in, via the Host unit, to the server room to assess the situation yourself at any time.

The IMS-4000 monitors IP Devices through pinging and port availability. When a network component becomes unavailable, the IMS-4000 notifies you about which IP device is unavailable. You can monitor the status of network links, routers, printers and servers - any device which has an IP address. Each IMS-4000 Host and Node can monitor up to 64 devices. When a device does not respond to the IMS query, it contacts you immediately to alert you to the situation.

When a problem occurs in your network, the IMS-4000 will find you and notify you of the problem no matter where you are. Multiple communication interfaces - Ethernet port and standard telephone interface - guarantee that you get the message. You receive early notification before a problem turns into a disaster. The integrated modem / voice interface of the IMS-4000 Host means network events and environmental problems are sent to you in your own voice. When all you have is a phone, you will still know whatís going on in your network. You get the message fast.

Curious about your network? You can always obtain status information about your infrastructure - anytime, anywhere. Call into the IMS-4000 using your computerís standard dial-up networking. The IMS Console software operates the same remotely as it does locally for complete management and control of your IMS system. If youíre not near a computer, then just pick up any phone and call into the IMS-4000: It will tell you in a real voice report the status of all conditions.

Buy IMS-4000

IMS-4000 Accessories:

Sensaphone IMS-4000 accessories such as sensors, power supply, motion detectors, smoke detectors, temperature sensors and much more. Buy Sensaphone Sensors
IMS-4000 Host
IMS4000 Host

IMS-4000 Node
IMS-4000 Node

IMS-4000 Powergate
Sensaphone Powergate

IMS-4000 Powergate2
Power gate rear view

IMS-4000 Accessories

IMS-4000 Features

IMS-4000 Specifications

Click to Buy

IMS-4000 Sensors

Each IMS Solution Sensor connects to the Host or Node input with an RJ-45 jack. Because the sensors utilize your existing Category-5 structured wiring system, no special wiring or schematics are needed to install them. Simply locate where you want to place a sensor, attach a standard patch cable, plug it into your patch panel and do the same in your server room to connect your sensor to the IMS-4000. Itís no different than wiring up a workstation or a printer.

Once connected, the IMS-4000 will automatically recognize the type of sensor installed and configure it for you, using a standard template that you can modify. Because the IMS-4000 supplies power and configuration data for each sensor, the IMS-4000 can detect faults with your sensors: If thereís a cable disruption or your sensor is accidentally unplugged, you will know it.

Each IMS Host or Node attaches to your Ethernet network via the IMS Network Interface for monitoring of your network events.

IMS4000 page  

Product Menu
Complete POS Systems   Computer Systems   Monitors   Barcode Scanners   Barcode Printers   Card Printers

Receipt Printers   Cash Drawers   Pole Displays   Palm Pilots   Check Readers   Credit Card Readers   Scales

Cash Register Express   Restaurant Pro Express   POS Keyboards   POS Terminals  Turnkey POS Packages

Choosing Barcode Scanners     Credit Card Processing    Remote Monitoring Systems

Inventory Track Express   Why Computerize Your Cash Register   Printer Supplies  

Remotely access multiple computers   ID Verification Devices  

| Home | About Us | Computer Systems | POS System Hardware | POS System Software | Remote monitoring system | Contact

© Copyright 2015 Semicron Systems