Sensaphone FGD-2800
Home About Us Computer Systems Complete POS System POS Monitors All-In-One Terminals Contact
Sensaphone 1100 Sensaphone 2000 Sensaphone Express Sensaphone Skymetry IMS-4000 SCADA 3000

Sensaphone 2800 Remote Monitoring System & Wireless Sensors - Part # FGD-2800

In addition to the features of the Sensaphone 1400 and 1800, the Sensaphone FGD-2800 adds the ability to read sensor status from wireless sensors. Sensaphone wireless technology includes full analog capability that will enable you monitor and read real values, such as actual temperature, real tank levels, and flow rates. You can use up to four wireless sensors with the Sensaphone 2800. You can choose from available variety of wireless sensor types, including Temperature Sensors, Humidity Sensors, Power Failure detectors, Motion Detectors, Water detection sensors.

In addition to the wireless Sensors, there are also two Wireless Interface modules which will enable you to connect to existing equipment or sensors and transmit their status back to the FGD-2800 wirelessly. There is also a compatible Dry Contact wireless module, and a 4-20mA wireless module. The 4-20mA wireless module provides battery backed 24 VDC power for your transducer.

 
Sensaphone Models
Model 400
Model 800
Model 1400
Model 1800
Model WEB600
Model SAT4D
Model 2800
Station Sitter
Sensaphone 2000
Sensaphone Express II
SCADA 3000
Skymetry
IMS-1000
IMS-4000
Accessories
Privacy/Return Policy
Resellers Sign-up
Home
Demovoice demo
 
  wireless sensors for FGD2800Sensaphone 2800Most of the Sensaphone Wireless Sensors run on batteries for up to 3 years. You can place a sensor on the wall and start monitoring right away. FGD-2800 will scan, find the sensor, self configure and do most of the work. All you need to do is record a custom voice message and fill in a few parameters. The Wireless Sensor Network is always being watched by the FGD2800. In addition to looking for alarms from the sensor values, it is also looking to make sure that each wireless sensor is fully functional and its batteries are full. If there are any problem with the wireless sensors, the FGD2800 will initiate a diagnostic alarm and notify the appropriate personnel immediately.

Sensaphone 2800 uses standard phone line to make phone calls to the appropriate personnel to announce alarm conditions. You can have a custom voice message for each monitoring condition. You can also record each message in your own voice for easy alarm identification. Alarm notification will report out to eight people until acknowledged. Learn more


          FGD-2800 Specifications

Part # Description Price
Sensaphone 2800 with NEMA 4X Clear Door
FGD-2800-CD
Sensaphone 2800 Wireless Monitoring System with NEMA 4X Clear Door Enclosure. Comes with AC Power Adapter, 2.8K Temperature Probe, Telephone Cable, 14 AWG Grounding Cable, Mounting Hardware, Instruction Manual.
$1075.50 Qty  

Sensaphone 2800 with NEMA 4X Solid Door
FGD-2800-SD
Sensaphone 2800 Wireless Monitoring System with NEMA 4X Solid Door Enclosure. Comes with AC Power Adapter, 2.8K Temperature Probe, Telephone Cable, 14 AWG Grounding Cable, Mounting Hardware, Instruction Manual.
$1075.50 Qty  

Sensaphone FGD-2800, NEMA 4X Clear Door, 220VAC
FGD-2800-CD-INT
Sensaphone 2800 Wireless Monitoring System with NEMA 4X Clear Door Enclosure, for 220VAC. Comes with 2.8K Temperature Probe, Telephone Cable, Mounting Hardware, Instruction Manual.
$1093.50 Qty  

FGD-2800 Accessories & Sensors

FGD2800 Wireless Outdoor Weatherproof antenna
Outdoor Weatherproof
Antenna Kit

FGD-2810
Outdoor Weatherproof Antenna Kit: Designed to work with the Sensaphone 2800. Allows you to place your Sensaphone 2800 in a location with reduced signal contact with the wireless sensors. Kit includes a mast mounting bracket, U-bolts, 30ft of cable. More info
$89.10 Qty  

WSR-0100 Wireless Indoor Temperature Sensor
WSR-0100
Wireless Indoor Temperature Sensor. The WSR-0100 is designed to work with the Sensaphone FGD-2800. More info.
$175.50 Qty  

WSR-0101 Wireless Indoor Dry Contact Interface
WSR-0101
Wireless Indoor Dry Contact Sensor. The WSR-0101 is designed to work with the Sensaphone FGD-2800. More info.
$166.50 Qty  

WSR-0102 Wireless Indoor Power Failure Sensor
WSR-0102
Wireless Indoor Power Failure Sensor. The WSR-0102 is designed to work with the Sensaphone FGD-2800.More info.
$193.50 Qty  

WSR-0103 Wireless Indoor Humidity Sensor
WSR-0103
Wireless Indoor Humidity Sensor. The WSR-0103 is designed to work with the Sensaphone FGD-2800.More info.
$220.50 Qty  

WSR-0104 Wireless Indoor 4-20mA Interface
WSR-0104
Wireless 4-20mA Sensor. The WSR-0104 is designed to work with the Sensaphone FGD-2800.More info.
$202.50 Qty  

WSR-0105 Wireless Indoor Motion Detection Sensor
WSR-0105
Wireless Motion Detector. The WSR-0105 is designed to work with the Sensaphone FGD-2800. More info.
$175.50 Qty  

WSR-0106 Wireless Spot Water Detection Sensor
WSR-0106
Wireless Spot Water Detection Sensor. The WSR-0106 is designed to work with the Sensaphone FGD-2800. More info.
$175.50 Qty  

WSR-0107 Wireless Zone Water Detection Sensor
WSR-0107
Wireless Zone Water Detection Sensor. The WSR-0107 is designed to work with the Sensaphone FGD-2800. More info.
$265.50 Qty  

Power Supply for FGD-2800 Wireless Sensors
WSR-0190
Power Supply for FGD-2800 Wireless Sensors.
$13.50 Qty  

FGD2800 Wireless Indoor Repeater
WSR-0199
Wireless Repeater. The WSR-0199 is designed to work with the Sensaphone FGD-2800. More info.
$247.50 Qty  

Sensaphone Accessory Hookup Wire
Accessory Hook-Up Wire
FGD-0010
Accessory Hook-Up Wire ; 50 ft. of 22-gauge wire for connecting sensors to your Sensaphone.
$6.30 Qty  

Surge Suppression Accessory for Power and Phone
Mini Surge Protector
Power and Phone

FGD-0067
Surge Suppressor with modem/fax surge suppression ; The traveler surge suppressor offers complete AC and phone line surge suppression for your Sensaphone and other electronic devices. A set of RJ11 telephone line suppression jacks protect dialup and voice/modem lines. Dimensions: 3.5" x 2.5" x 1.75". More info
$17.10 Qty  

Contact Type Spot Water Detection Sensor
Spot Water Detector
FGD-0013
Spot Water Detector ; Can be used with all Sensaphone models to detect the presence of water on a horizontal surface. Independently powered by internal lithium batteries. The batteries should last approximately 3 to 5 years. Multiple sensors can be wired in series to a single input. Comes with 25ft of wire. Dimensions: 2.25" x 1.125" x 3.625". More info
$81.00 Qty  

Contact Type Zone Water Detection Sensor
Zone Water Detector
FGD-0056
Zone Water Detector ; For use in detecting the presence of water on a floor or in a false ceiling. Comes with 10ft of WaterRope cable to cover a larger area than the FGD-0013 water sensor. Up to three WaterRopes can be cascaded from a single sensor for even greater coverage. Works with all Sensaphone products. Operates on two AA batteries (installed). Comes with 25 feet of wire. For additional 10ft of Water Rope, see FGD-0063. More info
$121.50 Qty  

Water Rope Extension
Extra 10ft Water Rope
FGD-0063
Additional 10ft Water Rope for use with Zone Water Detector FGD-0056.
$76.50 Qty  

Contact Type Temp Alert Temperature Switch
Temp Alert
FGD-0022
Temp Alert ; Wall mount, mechanical temperature sensor to detect if air temperature is too high or too low. Can be used with all Sensaphone models to monitor air temperature from -30° to 130° F (-34° to 54° C). Simply determine the acceptable temperature limits for your application by adjusting the temperature limit arms. When temperature exceeds the setting, the sensor triggers an alarm. Multiple Temp Alerts may be wired in parallel to a single input. No power required for operation. Comes with hook-up wire. Dimensions : 6.25" x 3.25" x 2". More info
$67.50 Qty  

Contact Type Humidistat Humidity Switch
Humidistat
FGD-0027
Humidistat ; Wall mount humidity sensor to detect if humidity is too high or too low. Can be used with all Sensaphone models. Range of the humidistat is 10% to 60% RH. The sensor causes an alarm when the humidity exceeds or falls below the set limit. Multiple sensors may be wired to a single input. Does not come with hook-up wire.
Dimensions : 4.125" x 2.75" x 1.5". More info
$36.00 Qty  

Magnetic Reed Door and Window Switch
Magnetic Reed Switch
FGD-0006
Magnetic Reed Switch ; Detects unauthorized entry or intrusion. Usually installed on most doors and windows to detect their opening and closing. May be used with all Sensaphone models. Several magnetic reed switches may be wired in series. Does not come with hook-up wire. Dimensions : 2.5" x 0.75" x 0.5" (part with screw terminals) 2.5" x 0.75" x 0.625" (part with magnet). More info
$9.00 Qty  

Infrared Motion Detection Sensor
Infra-Red Motion Detector
FGD-0007
Passive Infra-Red Motion Detector ; Can be used with all Sensaphone models to monitor the movement of warm bodies in a specific area. It will cause an alarm if motion is detected. Range of detection covers approximately 40 sq ft. Multiple sensors can be wired in series. Does not come with hook-up wire. Dimensions: 4" x 6" x 1.5". More info
$71.10 Qty  

Smoke Detector Sensor
Smoke Detector 110VAC
FGD-0049
Smoke Detector with Built-In Relay ; This photoelectric smoke alarm is powered by a hard wired 120VAC connection and provides an alarm output to trigger a Sensaphone alarm dial out. Has two sets of dry alarm contacts, one form - A SPST, and one form - C SPDT. The detector has tandem interconnect capability, allowing up to 6 devices to be connected together. A 90dBA audible horn is included. Can be used with all Sensaphone models. Does not come with hook-up wire. Dimensions: 5.1" diameter x 2.5". More info
$49.50 Qty  

Smoke Detector with Battery
Smoke Detector w/Battery Backup
FGD-0049-B
Same smoke detector as the FGD-0049, with the addition of a battery backup so that alarms can still be detected during a power failure. Works with all Sensaphone products. Does not come with wire.
$58.50 Qty  

4-20mA Humidity Sensor
Humidity Sensor
FGD-0052
4-20mA Humidity Sensor Can be used with any Sensaphone that supports 4-20mA inputs. The 24V power supply ( FGD-0053 ) is required unless the is used with SCADA 3000 or Express II. Does not come with hook-up wire.
$143.10 Qty  

Power Supply for 4-20mA sensors
Power Supply for FGD-0052
FGD-0053
Exclusively for use with the FGD-0052 Humidity Sensor. Only required if the Sensaphone model does not provide loop power for 4-20mA circuit.
$41.39 Qty  

PowerOut Alert Power Failure Switch
Power-Out Alert
FGD-0054
Power-Out Alert Model PS-110 : A compact power outage monitoring device to detect power failures. Easily plugs into any 110 VAC receptacle outlet for operation. Works with all Sensaphone models. Comes with 15ft hook-up wire. Dimensions: 2.25" x 2" x 3". More info
$53.10 Qty  

Temperature Sensor in Glass Bead Vial
2.8K Temperature Sensor
with Glass Bead Vial

FGD-0107
2.8K Temperature Sensor with Glass Bead Vial ; is ideal for cold storage temperature monitoring. This is a highly recommended sensor for every cold storage application. The glass bead filled vial will buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycle, opening of doors, and fans circulating air. Ranges: For Sensaphone 400 and 800 -20° to 150°F, For Sensaphone 1400, 1800, 2800, WEB600 : -109° to 115°F, For Sensaphone 2000 : -125° to 124°F, For Sensaphone Express II : -85° to 200°F. Does not come with wire. More info
$49.50 Qty  

2.8K Room temperature sensor
2.8K Temperature Sensor
FGD-0100
2.8K Remote Temperature Sensor ; Enables monitoring temperature at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low limits. It may be mounted anywhere air temperatures need to be measured, howeverthis model is recommended to be located in clean, dry environment. Ranges: For Sensaphone 400 and 800 -20° to 150°F, For Sensaphone 1400, 1800, 2800, WEB600 : -40° to 115°F, For Sensaphone 2000 : -40° to 124°F, For Sensaphone Express II : -40° to 150°F. Dimensions: 2.5" x .75" x .75". Does not come with wire.
For outdoor use, model FGD-0101 is recommended. More info
$18.00 Qty  

2.8K Weatherproof Temperature Sensor
2.8K Weatherproof
Temperature Sensor

FGD-0101
2.8K Weatherproof Remote Temperature Sensor ; Enables monitoring temperature at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low limits. It may be mounted anywhere air temperatures need to be measured, and is suitable for use in wet, dirty environments. Comes with 12ft wire. Ranges: For Sensaphone 400 and 800 -20° to 150°F, For Sensaphone 1400, 1800, 2800, WEB600 : -109° to 115°F, For Sensaphone 2000 : -125° to 124°F, For Sensaphone Express II : -85° to 200°F.
For indoor use, model FGD-0100 is recommended. More info
$27.00 Qty  

Weatherproof temperature sensor with NIST
2.8K Weatherproof
Temperature Sensor with NIST

FGD-0101-NIST
2.8K Weatherproof Remote Temperature Sensor with NIST ; Same as FGD-0101, but with Traceable Calibration Certificate
(NIST Temperature Certification).
$117.00 Qty  

10K Weatherproof Temperature Sensor
10K Weatherproof
Temperature Sensor

FGD-0102
10K Weatherproof Remote Temperature Sensor ; Enables monitoring temperature at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low limits. It may be mounted anywhere air temperatures need to be measured, and is suitable for use in wet, dirty environments. Comes with 12ft wire. Ranges: For Sensaphone 1400, 1800, 2800, WEB600 : -87° to 168°F, For Sensaphone 2000 : -90° to 200°F, For Sensaphone Express II : -80° to 200°F, For SCADA 3000 : -35° to 205°F
For indoor use, model FGD-0100 is recommended. More info
$27.00 Qty  

10K Immersion Temperature Sensor
10K Immersion
Temperature Sensor

FGD-0105
10K Immersion Temperature Sensor : Is a waterproof temperature sensor for measuring the temperature of fluids inside a pipe. It is constructed of brass WEL-B thermowell ( which screws into a customer-supplied 0.5" NPT saddle or Thredolet fitting in a pipe). It fits into a thermowell via a brass 0.125" NPT fitting. Accurate to ± 0.36°F (0.2°C) and has a sensing range of 10°F to 230°F. Includes 8ft of 24AWG wire. Dimensions: Thermowell 5.125", Sensor in well 6.5". More info
$54.00 Qty  

10K Indoor Zone Temperature Sensor
10K Indoor Decorator
Zone Temperature Sensor

FGD-0103
10K Indoor Decorator Zone Temperature Sensor : Offers precision room temperature sensing in an attractive wall-mounted enclosure. Accurate to 0.36°F (0.2°C) with a sensing range of 35°F to 140°F. The indoor decorator comes in a beige plastic enclosure, with a tan metal face plate. The cover is secured with tamper resistant hex screws. Dimensions: 4.5" x 3.25" x 1.25". Does not come with wire. More info
$36.00 Qty  

10K outdoor Temperature Sensor
10K Outdoor Air
Weatherproof
Temperature Sensor

FGD-0104
10K Outdoor Air Weatherproof Temperature Sensor : Is a sensitive temperature element with a stainless steel tube sheathe. It is mounted inside a ventilated, treated weather-resistant PVC shield to minimize radiant energy effects and mounted on a weatherproof outlet box for easy outdoor installation. Accurate to ± 0.36°F (0.2°C) with a sensing range of 30°F to 140°F. Comes with 8ft of 24AWG wire. Dimensions: 9" x 3" x 2". More info
$63.00 Qty  

J Type Thermocouple
J Type Thermocouple /
4-20mA Converter

FGD-0220
J-Type Thermocouple / 4-20mA Converter : Allows you to use a standard J-type thermocouple on any Sensaphone that accepts a 4-20mA input signal. It is useful when monitoring very high or very low temperatures that can not be monitored with a standard Sensaphone temperature sensor. Thermocouple not included. More info
$314.10 Qty  

Contact Type Float Level Switch
Float Switch
FGD-0222
Float Switch: The FGD-0222 float switch is a plastic, side-mounted float switch that is cost effective for level control applications in small tanks where it is more convenient to install a level switch through the sidewall of a tank. This style float switch can be rotated for Normall Open or Normally Closed operation. Combine two switches at different levels for a high and low level or pump control or alarming. More info
$35.10 Qty  

Multipoint Wireless Input - Output Accessory
Multi-Point Wireless I/O
FGD-0205
Multi-Point Wireless I/O : Is ideal if you need to connect one or two dry contacts and/or a 4-20mA transducer to a Sensaphone that is too far or too expensive to run cable. Two 24V power supplies and omni-directional antennas are included. Built-in LEDs indicate RF link and dry contact status. More info
$1125.00 Qty  

External Microphone Attachment
External Microphone
FGD-0057
External Microphone Attachment : Provides listen-in and/or high sound alarm capability at a remote location away from your Sensaphone. Check back page for Sensaphone product compatibility. Comes with 25 feet of wire. More info
$27.00 Qty  

Bluetooth Cell Phone Interface Accessory
Bluetooth
Cell Phone Interface

FGD-0230
Bluetooth Cell Phone Interface: The XLink allows your Sensaphone to dial and receive calls using any cell phone with Bluetooth technology. For example, suppose land-line telephone service was unavailable at the Sensaphone's location. By using the XLink, you can provide telephone service to your Sensaphone simply by locating a cell phone next to Sensaphone. The XLink will send all incoming calls to the Sensaphone and when the Sensaphone needs to dial out, the call will be seamlessly completed through the cell phone. More info
$107.10 Qty  

4-20mA Air Quality Sensor
Air Quality Sensor
FGD-0066
Indoor Air Quality Sensor: The Sensaphone Indoor Air Quality sensor will allow you to monitor levels of pollution from 0-100 percent with any Sensaphone that will accept a 4-20mA input signal. These air contaminants include cigarette smoke, cooking exhaust, automobile exhaust, solvents, and many others. This sensor requires a 24VDC power supply, part number FGD-0053. More info
$134.10 Qty  

4-20mA Carbon Monoxide Sensor
Carbon Monoxide
(CO) Sensor

FGD-0065
Carbon Monoxide Sensor: Carbon Monoxide is a highly toxic gas that has no color or odor. The Sensaphone Carbon Monoxide sensor will allow you to monitor CO levels from 0-300 ppm with any Sensaphone that will accept a 4-20mA input signal. This sensor requires a 24VDC power supply, part number FGD-0053. More info
$197.10 Qty  

4-20mA Carbon Dioxide Sensor
Carbon Dioxide
(CO2) Sensor

FGD-0068
Carbon Dioxide Sensor: The Sensaphone Carbon Dioxide sensor will allow you to monitor levels of Carbon Dioxide from 0-2,000 ppm with any Sensaphone that will accept a 4-20mA input signal. This sensor requires a 24VDC power supply, part number FGD-0053. More info
$206.10 Qty  


Sensaphone Accessories




FGD-2800 page Hear a live demonstration


Product Menu
Complete POS Systems   Computer Systems   Monitors   Barcode Scanners   Barcode Printers   Card Printers

Receipt Printers   Cash Drawers   Pole Displays   Palm Pilots   Check Readers   Credit Card Readers   Scales

Cash Register Express   Restaurant Pro Express   POS Keyboards   POS Terminals  Turnkey POS Packages

Choosing Barcode Scanners     Credit Card Processing    Remote Monitoring Systems

Inventory Track Express   Why Computerize Your Cash Register   Printer Supplies  

Remotely access multiple computers   ID Verification Devices  

| Home | About Us | POS Hardware | POS Software | Contact

© Copyright 2015 Semicron Systems