|
|
|
|
Sensaphone 2800 Features: Buy Sensaphone 2800
Stick It Anywhere!
Most of the Sensaphone Wireless Sensors run on batteries for up to 3 years. You can literally, just stick a sensor to the wall and start monitoring right away. The 2800 will scan, find the sensor, self configure and do most of the work for you. All you need to do is to record a custom voice message and fill in a few parameters. Buy Sensaphone 2800
Self Diagnostics
The Wireless Sensor Network is always being watched by the 2800. In addition to looking for alarms from the sensor values, it is also looking to make sure that each wireless sensor is fully functional and its batteries are full. If there are any problems with the wireless sensors, the 2800 will initiate a diagnostic alarm and notify the appropriate personnel immediately.
 Where You Need It
Also included on the 2800 are four traditional, hard-wired sensor inputs. These are Sensaphone Universal Inputs that can be used with temperature sensors, dry contact sensors, and
even 4-20mA transducers.
So, when you have monitoring requirements near the 2800, just wire them in. When wiring is inconvenient or further away, just stick the wireless sensors where you need them.
The wireless sensors will operate up to 300 feet line-of-site away from the 2800. Not far enough? Just add a wireless repeater to go farther. The repeater can be located up to 4000 feet line-of-site from the 2800. Then, one or more sensors can be located up to 300 feet line-of-site from the repeater.
Notification
Just like the other Sensaphone products, the 2800 uses the reliability of a standard phone line to make phone calls to the appropriate personnel to announce alarm conditions.
Each monitoring condition, both wired and wireless, can have a custom voice message attached to it. Each message is recorded in your own voice for easy alarm identifi cation. Alarm notification will repeat out to eight people until acknowledged. Buy Sensaphone 2800
Applications
Use the 2800 to monitor multiple greenhouses without wires, multiple barns, coolers, freezers, or a wide variety of remote equipment. The new Sensaphone 2800 can be used anywhere you would use our other Sensaphone products. The 2800 just makes installa tion and expansion faster and easier. Extend your reach and monitor your critical remote locations with the new Sensaphone 2800.
|
| Sensaphone FGD-2800
|
| Built-In
|
Power failure, Sound level
|
| Inputs
|
4 Hard-wired Universal, 4 Wireless
|
| Outputs
|
1 Relay ( manual or automatic control )
|
| Notification
|
8 custom voice phone calls
|
| Special Features
|
Wireless Sensor Technology
|
|
