Sensaphone FGD0205 Multi-Point Wireless IO System to connect one or two dry contacts to a Sensaphone unit.
| Home | About Us | Computer Systems | Complete POS System | Remote Monitoring System | Contact |
| Sensaphone 1100 | Sensaphone 2000 | Sensaphone Express | Sensaphone Skymetry | IMS-4000 | SCADA 3000 |
Sensaphone FGD0205 Multi-Point Wireless I / O.
 FGD-0205 The multi-point wireless I/O system is adeal if you need to connect one or two dry contacts and/or a 4-20mA transducer to a Sensaphone that is too far or too expensive to run cable. The system will replicate these sensors up to a distance of 600ft indoors or up to 4 miles line of site (flat terrain, raised antennas). The system includes a matched 1 Watt 900MHz transmitter and receiver. Two 24V power supplies and omni-directional antennas are included. Built-in LEDs indicate RF link and dry contact status. Compatibility: Sensaphone models 1400, 1800, 2800, 2000, Express II, SCADA 3000, WEB600. Package Contents (1) Transmitter (1) Receiver (2) 24VDC power supplies (2) Antennas (1) Instruction Booklet |
Buy here |
| Specifications |
|
| Frequency/Technology: Direction - Uni-directional Frequency Range - 902 MHz to 928 MHz FHSS |
Analog Input (transmitter): Current Input Signal - 4 to 20mA Input Resistance - Less than 17 ohms |
| Digital Input (transmitter): Number of Inputs - 2 Input Voltage Range - 5V AC/DC to 30V AC/DC |
Analog Output (Receiver): Maximum Laod - 750 ohms |
| Digital Output (receiver): Number of Outputs - 2 Contact Type - NO/NC contact Maximum Switching Voltage - 30VDC to 120V AC Limiting Continous Current - 0.5A |
Power Supply: Supply Voltage - 12V DC to 30V DC Typical Current Consumption - 75 to 350mA (transmitter), 85mA (receiver) |
General: Dimension - 3.89" x 0.68" x 4.5" Mounting - DIN Rail Mount Range - Up to ten miles UL, USA/Canada - Class I, Div 2, Groups A, B, C, D |
|