Sensaphone 400
Home About Us Computer Systems Complete POS System POS Monitors All-In-One POS Terminals Contact
Sensaphone 1100 Sensaphone 2000 Sensaphone Express Sensaphone Skymetry IMS-4000 SCADA 3000

Sensaphone 400 Remote Environmental Monitoring & Temperature Alarm System
Can You Do Without This Remote Temperature Monitoring Device?

Sensaphone Model 400 is the new replacement for the model 1104 and the Cottage Sitter. For small businesses, property owners, and more, the ALL NEW Sensaphone 400 offers an easy, inexpensive way to monitor a remote facility. It can be used in any clean indoor application to monitor varieties of environmental conditions.

What is Sensaphone ? Choosing the Right Sensaphone
Sensaphone Models
Model 400
Model 800
Model 1400
Model 1800
Model WEB600
Model SAT4D
Model 2800
Station Sitter
Sensaphone 2000
Sensaphone Express II
SCADA 3000
Skymetry
IMS-1000
IMS-4000
Accessories
Privacy/Return Policy
Resellers Sign-up
Home
Demolisten to sensaphone message
 
 
House using Sensaphone 400Sensaphone FGD-0400 • Ideal for monitoring residential homes.
• Built-in power failure & Sound Level (requires external microphone) sensors.
• 4 Inputs - dry contact or temperature.
• 1 Output Relay (manual or automatic control).
• Automatic input type configuration.
• Built-in relay for remotely changing temperature of a dual setback thermostat.


View large picture       Model 400 Features       Model 400 Specifications

Sensaphone 400 has a built-in ability to monitor for power failures and to listen to the sound of a smoke detector. There are also four external inputs that can be connected to a variety of sensors to monitor temperature, water on the floor, humidity, and much more. One of the four external inputs already comes with a temperature sensor for monitoring temperature where the unit is installed.

When an alarm is detected, the Sensaphone 400 can notify up to four people by making voice phone calls. It will continue to make phone calls until someone responds to the call. The voice messages can be custom recorded, so you get to describe each alarm message that it speaks in your own voice. The phone interface includes a line seize feature so that extension phones are automatically disconnected when it needs to make an alarm phone call.

A built-in output relay is provided to switch an external device either automatically, or manually. You can use it to have a local light or siren trip when an alarm occurs, or even to set off a local alarm when the phone line is cut or unplugged. You can even use it to control a dual setback thermostat to change the temperature remotely. Also includes nonvolatile memory and a 24-hour battery backup with user installed batteries.


Part # Description Price
fgd-400

FGD-0400
Sensaphone, Model 400. Comes with AC Power Adapter, Telephone Cable, 2.8K Temperature Probe, Terminal Srew Driver, Instruction Manual.
$355.50 Qty  

fgd-400 with international power

FGD-0400-INT
Sensaphone, Model 400 with International Power. Comes with AC Power Adapter, Telephone Cable, 2.8K Temperature Probe, Terminal Srew Driver, Instruction Manual.
$373.50 Qty  

Sensaphone 400 Accessories & Monitoring Sensors

fgd-0010
Accessory Hook-Up Wire
FGD-0010
Accessory Hook-Up Wire ; 50 ft. of 22-gauge wire for connecting sensors to your Sensaphone.
$9.30 Qty  

fgd-0064
Dual Setback Thermostat
FGD-0064
Dual Setback Thermostat ; Lets you enter the desired setpoint for both your “away” and “home” temperatures. A control signal, sent from your Sensaphone, switches between these two settings. More info
$62.10 Qty  

fgd-0024
Thermostat Power Supply
XFR-0024
12VDC Power Supply for Remote Setback Thermostat, FGD-0064
$13.50 Qty  

fgd-0067
Mini Surge Protector
Power and Phone

FGD-0067
Surge Suppressor with modem/fax surge suppression ; The traveler surge suppressor offers complete AC and phone line surge suppression for your Sensaphone and other electronic devices. A set of RJ11 telephone line suppression jacks protect dialup and voice/modem lines. Dimensions: 3.5" x 2.5" x 1.75". More info
$17.10 Qty  

fgd-0013
Spot Water Detector
FGD-0013
Spot Water Detector ; Can be used with all Sensaphone models to detect the presence of water on a horizontal surface. Independently powered by internal lithium batteries. The batteries should last approximately 3 to 5 years. Multiple sensors can be wired in series to a single input. Comes with 25ft of wire. Dimensions: 2.25" x 1.125" x 3.625". More info
$81.00 Qty  

fgd-0056
Zone Water Detector
FGD-0056
Zone Water Detector ; For use in detecting the presence of water on a floor or in a false ceiling. Comes with 10ft of WaterRope cable to cover a larger area than the FGD-0013 water sensor. Up to three WaterRopes can be cascaded from a single sensor for even greater coverage. Works with all Sensaphone products. Operates on two AA batteries (installed). Comes with 25 feet of wire. For additional 10ft of Water Rope, see FGD-0063. More info
$121.50 Qty  

fgd-0063
Extra 10ft Water Rope
FGD-0063
Additional 10ft Water Rope for use with Zone Water Detector FGD-0056.
$76.50 Qty  

fgd-0022
Temp Alert
FGD-0022
Temp Alert ; Wall mount, mechanical temperature sensor to detect if air temperature is too high or too low. Can be used with all Sensaphone models to monitor air temperature from -30° to 130° F (-34° to 54° C). Simply determine the acceptable temperature limits for your application by adjusting the temperature limit arms. When temperature exceeds the setting, the sensor triggers an alarm. Multiple Temp Alerts may be wired in parallel to a single input. No power required for operation. Comes with hook-up wire. Dimensions : 6.25" x 3.25" x 2". More info
$80.10 Qty  

fgd-0027
Humidistat
FGD-0027
Humidistat ; Wall mount humidity sensor to detect if humidity is too high or too low. Can be used with all Sensaphone models. Range of the humidistat is 10% to 60% RH. The sensor causes an alarm when the humidity exceeds or falls below the set limit. Multiple sensors may be wired to a single input. Does not come with hook-up wire.
Dimensions : 4.125" x 2.75" x 1.5". More info
$36.00 Qty  

fgd-0006
Magnetic Reed Switch
FGD-0006
Magnetic Reed Switch ; Detects unauthorized entry or intrusion. Usually installed on most doors and windows to detect their opening and closing. May be used with all Sensaphone models. Several magnetic reed switches may be wired in series. Does not come with hook-up wire. Dimensions : 2.5" x 0.75" x 0.5" (part with screw terminals) 2.5" x 0.75" x 0.625" (part with magnet). More info
$9.00 Qty  

fgd-0007
Infra-Red Motion Detector
FGD-0007
Passive Infra-Red Motion Detector ; Can be used with all Sensaphone models to monitor the movement of warm bodies in a specific area. It will cause an alarm if motion is detected. Range of detection covers approximately 40 sq ft. Multiple sensors can be wired in series. Does not come with hook-up wire. Dimensions: 4" x 6" x 1.5". More info
$71.10 Qty  

fgd-0049
Smoke Detector 110VAC
FGD-0049
Smoke Detector with Built-In Relay ; This photoelectric smoke alarm is powered by a hard wired 120VAC connection and provides an alarm output to trigger a Sensaphone alarm dial out. Has two sets of dry alarm contacts, one form - A SPST, and one form - C SPDT. The detector has tandem interconnect capability, allowing up to 6 devices to be connected together. A 90dBA audible horn is included. Can be used with all Sensaphone models. Does not come with hook-up wire. Dimensions: 5.1" diameter x 2.5". More info
$49.50 Qty  

fgd-0049B
Smoke Detector w/Battery Backup
FGD-0049-B
Same smoke detector as the FGD-0049, with the addition of a battery backup so that alarms can still be detected during a power failure. Works with all Sensaphone products. Does not come with wire.
$58.50 Qty  

fgd-0052
Humidity Transmitter
FGD-0052
Humidity Transmitter ( 4-20mA ) ; A space-mount, low-profile humidity transducer. Transmits actual humidity levels to the Sensaphone for programmable high and low alarm limits. Can be used with any Sensaphone that supports 4-20mA inputs. The 24V power supply ( FGD-0053 ) is required unless the transmitter is used with SCADA 3000 or Express II. Does not come with hook-up wire. Dimensions: 2.75" x 4.50" x 1.38". More info
$143.10 Qty  

fgd-0053
Power Supply for FGD-0052
FGD-0053
Exclusively for use with the FGD-0052 Humidity Transmitter. Only required if the Sensaphone model does not provide loop power for 4-20mA circuit.
$41.39 Qty  

fgd-0054
Power-Out Alert
FGD-0054
Power-Out Alert Model PS-110 : A compact power outage monitoring device to detect power failures. Easily plugs into any 110 VAC receptacle outlet for operation. Works with all Sensaphone models. Comes with 15ft hook-up wire. Dimensions: 2.25" x 2" x 3". More info
$58.50 Qty  

fgd-0107
2.8K Temperature Sensor
with Glass Bead Vial

FGD-0107
2.8K Temperature Sensor with Glass Bead Vial ; is ideal for cold storage temperature monitoring. This is a highly recommended sensor for every cold storage application. The glass bead filled vial will buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycle, opening of doors, and fans circulating air. Ranges: For Sensaphone 400 and 800 -20° to 150°F, For Sensaphone 1400, 1800, 2800, WEB600 : -109° to 115°F, For Sensaphone 2000 : -125° to 124°F, For Sensaphone Express II : -85° to 200°F. Does not come with wire. More info
$49.50 Qty  

fgd-0100
2.8K Temperature Sensor
FGD-0100
2.8K Remote Temperature Sensor ; Enables monitoring temperature at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low limits. It may be mounted anywhere air temperatures need to be measured, howeverthis model is recommended to be located in clean, dry environment. Ranges: For Sensaphone 400 and 800 -20° to 150°F, For Sensaphone 1400, 1800, 2800, WEB600 : -40° to 115°F, For Sensaphone 2000 : -40° to 124°F, For Sensaphone Express II : -40° to 150°F. Dimensions: 2.5" x .75" x .75". Does not come with wire.
For outdoor use, model FGD-0101 is recommended. More info
$27.00 Qty  

fgd-0101
2.8K Weatherproof
Temperature Sensor

FGD-0101
2.8K Weatherproof Remote Temperature Sensor ; Enables monitoring temperature at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low limits. It may be mounted anywhere air temperatures need to be measured, and is suitable for use in wet, dirty environments. Comes with 12ft wire. Ranges: For Sensaphone 400 and 800 -20° to 150°F, For Sensaphone 1400, 1800, 2800, WEB600 : -109° to 115°F, For Sensaphone 2000 : -125° to 124°F, For Sensaphone Express II : -85° to 200°F.
For indoor use, model FGD-0100 is recommended. More info
$27.00 Qty  

fgd-0101-NIST
2.8K Weatherproof
Temperature Sensor with NIST

FGD-0101-NIST
2.8K Weatherproof Remote Temperature Sensor with NIST ; Same as FGD-0101, but with Traceable Calibration Certificate
(NIST Temperature Certification).
$117.00 Qty  

fgd-0102
10K Weatherproof
Temperature Sensor

FGD-0102
10K Weatherproof Remote Temperature Sensor ; Enables monitoring temperature at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low limits. It may be mounted anywhere air temperatures need to be measured, and is suitable for use in wet, dirty environments. Comes with 12ft wire. Ranges: For Sensaphone 1400, 1800, 2800, WEB600 : -87° to 168°F, For Sensaphone 2000 : -90° to 200°F, For Sensaphone Express II : -80° to 200°F, For SCADA 3000 : -35° to 205°F
For indoor use, model FGD-0100 is recommended. More info
$27.00 Qty  

fgd-0105
10K Immersion
Temperature Sensor

FGD-0105
10K Immersion Temperature Sensor : Is a waterproof temperature sensor for measuring the temperature of fluids inside a pipe. It is constructed of brass WEL-B thermowell ( which screws into a customer-supplied 0.5" NPT saddle or Thredolet fitting in a pipe). It fits into a thermowell via a brass 0.125" NPT fitting. Accurate to ± 0.36°F (0.2°C) and has a sensing range of 10°F to 230°F. Includes 8ft of 24AWG wire. Dimensions: Thermowell 5.125", Sensor in well 6.5". More info
$54.00 Qty  

fgd-0103
10K Indoor Decorator
Zone Temperature Sensor

FGD-0103
10K Indoor Decorator Zone Temperature Sensor : Offers precision room temperature sensing in an attractive wall-mounted enclosure. Accurate to 0.36°F (0.2°C) with a sensing range of 35°F to 140°F. The indoor decorator comes in a beige plastic enclosure, with a tan metal face plate. The cover is secured with tamper resistant hex screws. Dimensions: 4.5" x 3.25" x 1.25". Does not come with wire. More info
$36.00 Qty  

fgd-0104
10K Outdoor Air
Weatherproof
Temperature Sensor

FGD-0104
10K Outdoor Air Weatherproof Temperature Sensor : Is a sensitive temperature element with a stainless steel tube sheathe. It is mounted inside a ventilated, treated weather-resistant PVC shield to minimize radiant energy effects and mounted on a weatherproof outlet box for easy outdoor installation. Accurate to ± 0.36°F (0.2°C) with a sensing range of 30°F to 140°F. Comes with 8ft of 24AWG wire. Dimensions: 9" x 3" x 2". More info
$63.00 Qty  

fgd-0220
J Type Thermocouple /
4-20mA Converter

FGD-0220
J-Type Thermocouple / 4-20mA Converter : Allows you to use a standard J-type thermocouple on any Sensaphone that accepts a 4-20mA input signal. It is useful when monitoring very high or very low temperatures that can not be monitored with a standard Sensaphone temperature sensor. Thermocouple not included. More info
$314.10 Qty  

fgd-0222
Float Switch
FGD-0222
Float Switch: The FGD-0222 float switch is a plastic, side-mounted float switch that is cost effective for level control applications in small tanks where it is more convenient to install a level switch through the sidewall of a tank. This style float switch can be rotated for Normall Open or Normally Closed operation. Combine two switches at different levels for a high and low level or pump control or alarming. More info
$35.10 Qty  

fgd-0205
Multi-Point Wireless I/O
FGD-0205
Multi-Point Wireless I/O : Is ideal if you need to connect one or two dry contacts and/or a 4-20mA transducer to a Sensaphone that is too far or too expensive to run cable. Two 24V power supplies and omni-directional antennas are included. Built-in LEDs indicate RF link and dry contact status. More info
$1439.10 Qty  

fgd-0057
External Microphone
FGD-0057
External Microphone Attachment : Provides listen-in and/or high sound alarm capability at a remote location away from your Sensaphone. Check back page for Sensaphone product compatibility. Comes with 25 feet of wire. More info
$27.00 Qty  

fgd-2810
Outdoor Weatherproof
Antenna Kit

FGD-2810
Outdoor Weatherproof Antenna Kit: The FGD-2810 Outdoor Weatherproof Antenna Kit is designed to work with the Sensaphone 2800 Environmental Monitoring System. The weatherproof antenna allows you to place your Sensaphone 2800 in a location that would normally have reduced signal contact with the wireless sensors, such as in a metal cabinet or outside a building. It includes a mast mounting kit which includes a heavy duty steel bracket, and a pair of U-bolts, which allows installation on mast up to 2 inches in diameter. Comes with 30ft of cable. More info
$89.10 Qty  

fgd-0300
Serial to Ethernet
Device Server

FGD-0300
Serial-To-Ethernet Device Server: The Serial-to-Ethernet Device Server allows you to access your Sensaphone 2000 or SCADA 3000 anywhere on a local LAN or the internet. Simply connect the device to the serial poer on your Sensaphone and connect the Ethernet jack to your network. The software included with the device server will route your computer's serial port to the network-connected device server, thus establishing a fast, direct connection to your Sensaphone. More info
$179.10 Qty  

fgd-0066
Air Quality Sensor
FGD-0066
Indoor Air Quality Sensor: The Sensaphone Indoor Air Quality sensor will allow you to monitor levels of pollution from 0-100 percent with any Sensaphone that will accept a 4-20mA input signal. These air contaminants include cigarette smoke, cooking exhaust, automobile exhaust, solvents, and many others. This sensor requires a 24VDC power supply, part number FGD-0053. More info
$134.10 Qty  

fgd-0065
Carbon Monoxide
(CO) Sensor

FGD-0065
Carbon Monoxide Sensor: Carbon Monoxide is a highly toxic gas that has no color or odor. The Sensaphone Carbon Monoxide sensor will allow you to monitor CO levels from 0-300 ppm with any Sensaphone that will accept a 4-20mA input signal. This sensor requires a 24VDC power supply, part number FGD-0053. More info
$269.10 Qty  

fgd-0068
Carbon Dioxide
(CO2) Sensor

FGD-0068
Carbon Dioxide Sensor: The Sensaphone Carbon Dioxide sensor will allow you to monitor levels of Carbon Dioxide from 0-2,000 ppm with any Sensaphone that will accept a 4-20mA input signal. This sensor requires a 24VDC power supply, part number FGD-0053. More info
$206.10 Qty  

fgd-0055
Telephone
Adapter UK

FGD-0055
Telephone Adapter : Converts the U.S. Style RJ11 telephone plug to the type used in the United Kingdom (BT431A).
$4.50 Qty  


Sensaphone Accessories




Sensaphone 400 Features
Input Zones:
• Flexible inputs that support:
    Normally Open or Normally Closed contacts
    Temperature Sensors: -20°F to 150°F
    Four Channels in the Model 400
• Automatic input type configuration
• Programmable recognition times
• Internal calibration
Alarm Notification:
• Four phone numbers in the Model 400
• Makes voice phone calls with customized
  messages for easy identification
• Built-in alarm test function to simulate and test
  the notification process
• Includes telephone Line Seizure
Remote Access:
• Call in with any Touch-Tone phone to check
  the status of all monitored conditions.
• Make programming changes remotely from
  any Touch-Tone phone
Local Access:
• Keypad and speaker for local programming
• Easy voice-prompted programming
• Password-protected to restrict remote
  programming access
Output Relay:
• Low voltage NO/NC output relay included
• Manual or automatic alarm response switching





Microphone:
• Internal microphone for custom voice
  message recording
• Minitor high sound alarms
• Microphone can also be used for
  remote Listen-in feature
Voice Messaging:
• Built-in vocabulary for keypad programming
  and sensor readings
• Record custom voice phrases in your own
  voice to describe each input zone
• Record site identification message


Power Supply:
• Comes with plug-in power supply
• 24 Hour battery backup using 6 size C
  alkaline batteries (not included)
• Automatically monitors for power failure alarms
• International power options available
Compatibility:
• The Sensaphone 400 is a direct replacement
  for the model 1104 and CottageSitter
Buit-In CottageSitter Control:
• The built-in relay can be used to remotely
  change the temperature of a dual setback
  thermostat (Provide your own thermostat,
  or order the FGD-0064 Thermostat)
Sensaphone 400 Specifications
Size: 7.5"W x 2"H x 8.5"D
Shipping Weight: 4 lbs
Batteries: (6) 1.5 Volt "D" cell alkaline (not included)
Telephone Connection: FCC approved RJ-11 plug-in modular connector with 6 ft. cord
Operating Temperature Range: Unit should be kept between 32°F and 120°F
Temperature Sensing Range: -20°F to 150°F with remote temperature sensor
Approvals: NRTL listed for compliance with U.L. Standard 1459


FGD-0400 page Hear a live demonstration


Product Menu
Complete POS Systems   Computer Systems   Monitors   Barcode Scanners   Barcode Printers   Card Printers

Receipt Printers   Cash Drawers   Pole Displays   Palm Pilots   Check Readers   Credit Card Readers   Scales

Cash Register Express   Restaurant Pro Express   POS Keyboards   POS Terminals  Turnkey POS Packages

Choosing Barcode Scanners     Credit Card Processing    Remote Monitoring Systems

Inventory Track Express   Why Computerize Your Cash Register   Printer Supplies  

Remotely access multiple computers   ID Verification Devices  

| Home | About Us | POS Hardware | POS Software | Contact

© yp1710 Copyright Semicron Systems